Hands-on Solar Installation Training – 10 Day Program by Experts @ IIT BOMBAY - India Renewable Energy Consulting – Solar, Biomass, Wind, Cleantech
Select Page

 

SOLARINSTALL-Solar PV System Design & Installation Training

Conducted by

IIT Faculty & Solar Industry Experts

Date: 17th – 26th September 2016

Venue: IIT BOMBAY, Powai, Mumbai.

 

For Registration, talk to us -9952475480 or Email : events@solarmango.com

SOLARINSTALL course majorly focuses on hands-on training for component installation, commissioning of 1 kWp Off-Grid and 3 kWp On-Grid Solar PV Power Plant. It will also focus on Operations and Maintenance practices pertaining to solar PV systems. The participants will also be given training on marketing & entrepreneurship skill so that they will become the campaigners of solar energy.

Who is it for?

  • Engineers
  • Electricians
  • Technicians and other solar aspirants

What do you get from this Training Program?

PV system hands on practice

  • There will be a 1 kWp Off-Grid  &  3 kWp On-Grid Solar PV system plant for hands on practice of installation and commissioning

Certification  &  Job Opportunities

  • Certificates will be issued by kWatt Solutions Private Limited, Society for Innovation & Entrepreneurship, IIT-Bombay to the Students/faculties who would attend and successfully complete the training program
  • Government has set a target of 100GW solar installation by the year 2022 which will create job opportunities for more than 1.6 million skilled technicians in solar installation…

 

Training Program Agenda

 

Duration (Days) Underpinning Knowledge (Theory) Practical Compentencies
Day 1
  1. Electricity Basics
  2. Introduction to Conventional & Non-conventional source of Energy
  3. Basics of Solar energy
  4. PVSYst software for System design and report generation
Introduction of Institute, Display Room Visit, solar training yard visit

  1. Demonstration of PV components:-
    • Module
    • Inverter
    • Battery
    • Structure
    • BoS
  2. Tools Introduction & type of tools:-
    • Safety tools
    • Marking tools
    • Measuring tools
    • Testing tools
    • Working tools
    • Site selection, suitability & Planning
Day 2 & 3
  1. Study of solar photovoltaic cell & solar photovoltaic module, type and size
  2. PV module, Fundamental types of modules and its applications, PV components and configuration etc
    • Solar Photovoltaic system
    • Types of solar photovoltaic system
    • Grid connected solar PV system
  3. Off Grid connected solar PV system/Standalone Solar PV
  4. Series and Parallel connections of battery and Modules
  1. Series and Parallel connections of battery and Modules
  2. Reading and observations of PV power
  3. Module datasheet reading
  4. Inverter datasheet reading
Day 4
  1. Understanding the parameters of site survey
  1. Practical site survey
  2. Site survey form filling
  3. Analyzing the shading objects
  4. Land analysis
Day 5 Preparation of work statement & layout documents for the following:

  1. Foundation-P&M, Tools & Tackles
  2. Structure Erection- P&M, Tools & Tackles
  3. Module Mounting- Module sorting , tools & Tackles
  4. Cable Trenching & Conduit Laying- P&M, Tools & Tackles
  5. Cable Laying & Termination- Tools & Tackles, Pre Requisite
  6. Cable tray & cable laying
  7. Junction box Installation-Basic knowledge
  8. Inverter Erection –Tools & Tackles
  9. Battery installation & maintenance
  1. Site observation
  2. Observing Installation of Inverter, LT panel, PV module Series & parallel connection & testing
  3. Earthing pit design
  4. Earthing pit location/sizing
  5. Layout observation
Day 6
  1. Reading of drawing and Specification for the followings
  2. Foundation or Ramming
  3. Structure erection
  4. Requirement & Uses of Tools & Tackles. Basic knowledge of Ammeter Voltmeter, clamp on-meter, tong tester, Irradiance sensor, temperature sensors.
  1. Civil Foundations
  2. Module mounting structure and fixing of the same.
  3. alignment and tightening.
  4. Fixing of structure and its connection.

Day 7

(Off Grid/Stand Alone System installation)

  1. Reading of Single Line Diagram(SLD)Basic knowledge about tools and tackles required for PV plant Installation
  2. analysis and troubleshooting monitoring of generation per string incoming & outgoing power at junction box & Inverter level.
  3. Cable Gland-

Types of cable Gland

  1. Single compression cable Gland
  2. Double compression Cable Gland
  1. Module mounting (1kWp)
  2. Inverter Installation and Connection
  3. Installation of balance equipment and End termination Power cable.
  4. Installation of Junction
  5. String testing DC Side box
  6. Pole Erection, Types of pole
  7. Cable tray , types of cable tray & cable Tray
  8. Erection Battery , types of battery , Installation of Battery
Day 8
  1. Plant commissioning procedure
  2. Understanding Testing tools
  3. Understanding plant interconnections
  1. Plant commissioning procedure
  2. Understanding Testing tools
  3. Understanding plant interconnections

Day 9

(On Grid System installation of 3kWp)

  1. Understanding the concept of power evacuation
  2. Understanding the concept of grid synchronization
  3. Grid Fundamental AC & DC
  1. Module mounting (3kWp)
  2. Inverter Installation and Connection
  3. Installation of balance equipment and End termination Power cable.
  4. Installation of Junction
  5. String testing DC Side box
  6. Cable tray , types of cable tray & cable Tray
  7. Inspection, Testing & commissioning of PV plant
  8. Power evacuation
  9. Grid Synchronization
Day 10 Operation & Maintenance

  1. Introduction and over view of PV system
  2. Equipment’s under AC side & DC side and regular maintenance
  3. General Safety Guidelines for O&M
  4. Soft & Entrepreneurship skills
  1. Solar PV module cleaning & testing
  2. testing,
  3. Battery testing,
  4. Cell voltage testing
  5. Earthing testing,
  6. Cable testing.

Experts:

Training will be imparted by best professionals in solar field such as

Prof. Dr. Chetan Singh Solanki of IIT Bombay, who has an experience of more than 15 years in the field of solar, with 11+ Patents, 4 books on his name, who has also successfully incubated company in field of solar at SINE, IIT Bombay.

Mr. Bikash Kumar, Ex-VP for Lanco & MoserBaer and has been Board of Advisors for major PV companies in India.

Mr. Vaman Kuber is an Advisor for kWatt Solutions in developing rooftop and utility scale SPV power projects.

Mr. Ravi Tejwani has been part of kWatt Solutions with Ph.D in Solar Photovoltaics in Department of Energy Science and Engineering (DESE) at IIT Bombay also a Senior Research Associate (SRA).

For Registration, talk to us -9952475480 or Email : events@solarmango.com

 

Check out: EAI Consulting for Solar Energy – Solar PV & Solar Thermal


Copyright © 2024 EAI. All rights reserved.